Thermaltake Theron Plus Scroll Wheel Replacement

Written By: Steven Kontra
  • Comments: 0
Thermaltake Theron Plus Scroll Wheel Replacement

Difficulty

Easy

Steps

3

Time Required

5 minutes

Introduction

If it seems that an element of your scroll wheel is busted, it may need replacing. This guide will outline all the necessary steps to swap out a defective scroll wheel. With all the required parts and tools in hand, this guide should take but minutes to complete. Once finished, the scroll wheel for your Thermaltake Theron Plus Smart Mouse should be in working order.

  1. oTeWDkXQuTlNwNrY
    oTeWDkXQuTlNwNrY
    RCgTdlfMqpcVNAIQ
    qSgQCbhk1553Aq2D

    • Remove the plastic cover and pack of weights.

    • Remove the two 1.0 mm foam covers with tweezers.

    • Peel away the plastic screw cover with tweezers.

  2. nIB4WYurH14EYxwP
    nIB4WYurH14EYxwP
    4OsXIYwAM6G5fRQC

    • Remove the four 1.0 mm screws with a Ph #1 screwdriver.

    • Gently remove the top of the mouse.

  3. OVFHZybsrR3BfLPN
    OVFHZybsrR3BfLPN
    TaBQAgi4OvELYf5H

    • Grasp the scroll wheel and wiggle it out in the direction opposite the socket.

    • Be careful not to break the small plastic arms on either side of the scroll.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Steven Kontra

Member since: 05/04/18

509 Reputation

0 comments