Introduction
This guide will show you how to disassemble your Atari Lynx before diving into any problems.
Tools
-
-
Before disassembling your Atari Lynx, be sure the device is powered off.
-
Remove any game in the console by opening the right latch and sliding the game to the right.
-
-
-
Remove the four 35 mm Phillips #1 screws at each corner of the backside on the Atari Lynx.
-
Pinch the rear panel with your fingers and lift away from the Atari.
-
-
-
Remove the battery panel by pinching the sides with your fingers and lifting it away from the Atari.
-
-
-
Remove the control panel by pinching the sides with your fingers and lifting it away from the Atari.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
