Tea Kettle Switch Replacement

Written By: Anniek Moll
  • Comments: 5
Tea Kettle Switch Replacement

Difficulty

Easy

Steps

6

Time Required

15 minutes

Introduction

  1. NTcJSqRCi4vOtDvw
    NTcJSqRCi4vOtDvw
    sByJXbaDrftpjeeH
    OJHn1mdWXFFSfQJl

    • Before you start, disconnect the device from its power source.

    • Remove the two bottom screws.

    • Remove the two top screws.

    • Remove the handle from the kettle.

  2. nBEeqtvi1xUdoUvv
    nBEeqtvi1xUdoUvv
    BJr4yMIRJJSeCrJC

    • Pull out the switch.

    • If you pull too hard, you may dislodge another part as well as the spring that are both positioned behind the switch.

  3. qQEny3SVnQLTs2eJ

    • Click the replacement switch back into the handle part.

    Sorry, but I’m not clear on this—are you actually putting back the same switch you took out? Or is there a replacement part to obtain which isn’t listed at the beginning? Thanks!

    April -

    Hi April, The title of the article is Tea Kettle switch replacement.

    Jonny Hall -

  4. Lgp4fTUBJO3RQQiI

    • Insert the light back into the switch.

    • This might take some extra attention, so be precise.

  5. 64aW4gIUAqMP31gO

    • Place the handle part back on the frame.

  6. SJTXVUrF3UXdkWha

    • Plug in the kettle.

    • Press down on the switch to check if it works again.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Anniek Moll

Member since: 08/03/17

227 Reputation

3 comments

How much would it cost to repair this kettle switch live points?

Bheki Valoyi -

How much would it cost to fix the tea kettle switch live points?

Bheki Valoyi -

Can the kettle gadgets be replaced with another one

Michael Ombech -