Introduction
The "RIVAL" back side nameplate can be replaced with a customized 3D user-printed one.
Parts
-
-
To avoid electronically damaging either your computer or your mouse, unplug the usb cable from its socket.
-
-
-
The Rival 700 mouse is a non wireless mouse. The micro-USB cable end is an elbow socket, secured by a plastic clip.
-
To disconnect the cable from the mouse, firmly press the plastic clip using your thumb
-
-
-
The original nameplate is a soft rubber one that can be removed just by pulling it softly out of its socket.
-
WARNING: When reassembling, if you're using a custom nameplate that may not be as stretchable as the original one, insert it softly, and use a lime tool on the new part to avoid damaging the mouse socket.
-
-
-
You will be able to download the 3D files to design a custom nameplate on the Steelseries website. The link is also provided in the part description.
-
On this picture, the original "RIVAL" nameplate will be replaced with a new one on which i just had my Twitch ID printed.
-
Be creative, use colored plastic, put logos and drawings on your mouse.
-
To reassemble your device, follow these instructions in reverse order.
