Introduction

The motherboard is the component that controls the logic and computation of the laptop. This guide shows the steps to remove the motherboard for repair or replacement.

  1. 4BAvY21DXIYhbpZp
    • Turn the laptop over so its underside is facing upwards and visible.

  2. 1IYh5fEVphulRoHD
    • Standing so that the barcode and warning labels are upright and legible, push the left tab up and away from yourself.

  3. KpNwH2ROLUfHYKcJ
    • Standing so that the barcode and warning labels are upright and legible, push the right tab up and away from yourself.

  4. jEErFnailisjvPO2
    • Locate the small gap where the battery and the laptop shell meet. Lift from the gap and rotate the battery up and away from yourself.

  5. Ljvxh5qYGL43CKDJ
    • Pull battery away from laptop.

  6. MEyRmjDYVqJEBTUg
    • Flip laptop over so the bottom is facing upwards.

  7. Wt32uI56VoCylYCS
    • Remove 2 bottom screws in the top right on the HDD cover, with a size P000 screwdriver.

  8. hfWDLyOt4xZKxsVl
    hfWDLyOt4xZKxsVl
    2EhI1nPFHQeHE5FS
    • Pop open the cover to the HDD.

  9. YZbTvOmcEYYoDKjK
    • Remove the screws on the HDD with a Phillips #000 screwdriver.

  10. iWsii1KeZy52vUTM
    iWsii1KeZy52vUTM
    svBTfaoXQmp35JXR
    • Pull plastic tab away from the laptop.

    • Lift HDD away from laptop.

  11. UcrmTKU6LTKOmQrh
    • Flip the laptop over on its backside.

  12. SMfjLeYIP621pZ2E
    • Remove the screws holding the motherboard in place.

  13. 2najZVuVvwMLvwEt
    2najZVuVvwMLvwEt
    LgwpssZlAmM6uMiJ
    • Pop the motherboard away from the frame.

  14. KFA5XrSRiFEwGKbk
    • Remove the ribbon cable from the motherboard.

  15. XXlPSGqHQ1UGLZSE
    XXlPSGqHQ1UGLZSE
    o1M1kRBsGqL44Cb3
    • Remove motherboard from the laptop.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Alex Theg

Member since: 15/10/18

758 Reputation

0 comments