Sony Vaio Pro 13 Bottom Cover Replacement

Written By: Catherine Linton
  • Comments: 1
Sony Vaio Pro 13 Bottom Cover Replacement

Difficulty

Easy

Steps

3

Time Required

5 minutes

Introduction

  1. SNkWn5T524Val1lN
    SNkWn5T524Val1lN
    i1LApANucBVKDgV2

    • Remove cover for the extended battery connector. Use your finger nail or a plastic opening tool to remove it.

    • Remove the two rubber feet at the back of the computer, these can be removed in the same way.

  2. gF6CfeN1kWLkk11C
    gF6CfeN1kWLkk11C
    WcUBZdEcsOtdZ4IH

    • Remove the four 5.6mm Philips #00 screws located at the top of the computer.

    • Remove the eight 3.6mm Philips #00 screws on the base of the computer.

  3. oZsVKkF3wiA6brGe
    oZsVKkF3wiA6brGe
    SPNrMfCKyNcuxDuE

    • Using a plastic opening tool, pry the plastic casing away from the base of the computer, the remaining clips around the edges can be released using your hands.

    • Leave the side with the USB and audio port until last, then slide the case out and off, so the audio port doesn't get caught.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Catherine Linton

Member since: 29/01/16

345 Reputation

One comment

Hi…I have same laptop, what your advice getting the cover back on? especially near the audio and usb ports…that my hang up

thanks

chrisrai -