Sony Cyber-shot DSC-WX100 LCD Screen Replacement

Written By: Peter Prins

Comments: 1

Sony Cyber-shot DSC-WX100 LCD Screen Replacement

Difficulty

Moderate

Steps

Time Required

20 minutes

Introduction

The purpose of this guide is to replace the LCD screen. This guide will provide the necessary information to disassemble the camera, replace the screen, and to properly reassemble the components involved.

Tools

Step 1

Open the flap indicated to allow access to the battery slot.
The gray switch indicated has to be moved to the right in order to release the flap.

Step 2

If the old battery is still in the slot, then make sure the camera is turned off prior to removal.
If there is a battery currently in the slot, remove by first pulling downwards on the blue component. This will allow you to remove the battery from the slot.

Step 3

Remove all of the 1mm screws using a Philips #000 Screwdriver.
Remover the rest of the screws (2mm) from the camera covers using a Phillips #000 Screwdriver.

Step 4

Use the plastic opening tool to gently remove the front and back plates of the camera.

Step 5

Use a plastic opening tool to gently release the two indicated tabs.

Step 6

Pull up on the lower end of the plate. Lift it so the plate is high enough so that the marked bump is not holding it in place.

Pull up on the lower end of the plate. Lift it so the plate is high enough so that the marked bump is not holding it in place.
Pull away from the camera at the end of the metal plate with the blue circuits to then remove the plate from the rest of the camera.
For help please watch the video.