Introduction

This guide will teach the user how to disassemble and access the AV port for replacement or installation.

  1. rTcgis2rA2FBYUK4
    • The battery cover is located on the right side of the camera.

    • Slide the cover to expose the battery.

  2. mIV4RPQ3BEHBnTZl
    • Ensure that the battery lines up properly with the slot in the camera.

    • Slide battery in.

    • Slide cover closed.

    • Battery not shown

  3. 6hl3hRyF4wgqFqRJ
    • This is the camera without the front cover.

  4. UPG4tHMDKuvwEj4Z
    • Remove tripod piece located at the bottom of the camera. This piece should slide out with ease.

  5. fqwfgEUfrxHJCP4a
    fqwfgEUfrxHJCP4a
    SeSUnuqnBoyHbs2K
    B6lrsB6aeABTDPBb
    • Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are.

  6. EUTHwc4nAHRBLNJC
    EUTHwc4nAHRBLNJC
    ejwUERBfkspyeaMq
    AGSuPPgm5eXbIxrg
    • Pull apart the inner hardware from the back case by prying on the left side.

  7. fNupZxiLBxOWnjDh
    • Remove the back cover.

  8. vxICX46BG1xSFrWT
    • The back cover is now removed from the internal hardware.

  9. MxxaYSaP6pgR6sJH
    • This is the CCD module.

  10. CLimOvFmExu4vSFu
    • Use plastic opening tool pop open the two ribbons attaching to the CCD module.

    • These are the two ribbons.

  11. jmphpQuRBH2WFtYv
    • Remove CCD module.

    • You may have to tug on the ribbons to remove the CCD module.

  12. KLZICEjRVXCFjXeb
    • The CCD module is now removed from the camera.

  13. TjqiBk1D3JCsLnNY
    TjqiBk1D3JCsLnNY
    i6SpfJVqSWgKKIEX
    • These two screws hold in the AV port.

    • Use Phillips screwdriver to remove screws.

  14. YcARYEYvjQ4aAYYc
    • Remove metal screw plate.

  15. M1ZnNLntKBvZqg41
    • Use pry stick to pop off ribbon.

  16. nlKqqtFGVX1FhE4G
    • Remove AV port from camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Stephannie Allen

Member since: 11/03/13

255 Reputation

0 comments