Introduction

This guide will help you to replace the LCD panel unit on the Sony Cyber Shot DSC-W170.

If the screen protector or menu buttons are not working properly, the solution is to replace the LCD panel unit. The following is a step-by-step guide to removing the LCD panel unit and replacing it with a working one. Be careful when removing shattered glass displays and be sure to remove power/disconnect batteries before performing this task!

Take a look at our troubleshooting page if you need help to remove the battery.

On the Sony website you can find replacement parts for the camera.

  1. PJEam5hJkMDu2fie
    PJEam5hJkMDu2fie
    glKXQFNLwMBovXkh
    mWIhjtmKNjQIrOjw
    • Be sure to remove the battery before performing this task.

    • Remove the five 4 mm screws with a Phillips #000 screwdriver.

  2. fMiJ2IlulDWXv6JG
    • Use an opening pick to pry the LCD panel open.

  3. tImvaenn6lDlOxfe
    • Gently remove the LCD panel from the rest of the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Katharina Anglett

Member since: 13/09/23

529 Reputation

0 comments