Sony CDX-GT540UI Fuse Replacement

Written By: Odelkys Marquez
  • Comments: 1
Sony CDX-GT540UI Fuse Replacement

Difficulty

Very easy

Steps

5

Time Required

5 minutes

Introduction

This guide will show how to replace a bad fuse, which will cause the device not to turn on.

Before any repair work can be done, one must remove the device from the vehicle. To do so follow this link to see a vehicle general removal of a stereo system.

  1. UI4ZBKYYuSJB4pEc

    • Locate the clip on the wiring harness.

  2. RCK2NYDkUGKHsv56
    RCK2NYDkUGKHsv56
    DyhJblEEZNnYXpQW

    • Press down on the clip like you would an Ethernet cable.

    • Rock harness side to side, pulling gently towards you until harness detaches.

  3. QxNUoBuYJTx42Aiq

    • Once you have removed the wiring harness.

    • Locate the fuse.

  4. 3WiISdZTFxEeVRu4

    • Using your index finger and thumb on either side of the fuse.

  5. MdESDXNMCawFIhrb

    • Rock back and forth gently pulling towards yourself until the fuse is removed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Odelkys Marquez

Member since: 22/09/14

1067 Reputation

One comment

I would like to sincerely thank the person or persons that took the time ,energy and effort to put forth this information in an easily accessible way. BASICALLY YOU ARE COOL !!

germanspeedster -