Introduction
This is the replacement guide for the Shark IQ AV993 roller brush. This replacement is very simple and easy to complete, there are no required previous knowledge of the device needed to complete this guide. There are no hazards to be on the lookout for. Just be very gentle and carful when taking out parts and moving things around. This replacement might be needed if your roller brush is clogged or worn down to the point where it is no use.
-
-
Remove the dust bin from the device by pressing down on the release button and pulling out the tray.
-
-
-
Turn the device over so the bottom is facing upwards.
-
Press on the release tabs located on the roller brush cover.
-
Remove the cover from the device.
-
To reassemble your device, follow these instructions in reverse order.
