Introduction
If you cannot charge your Shark ION Robot, there may be a problem with the charging dock motherboard, which requires a replacement.
Damage to the charging dock could cause damage to the battery when trying to charge it or even a heat reaction, which could cause fires or other malfunctions.
Tools
-
-
Remove the three Torx T6 screws on the underside of the charging dock.
-
Lift off the lower case.
-
-
-
Unplug the two wires going into the motherboard, then gently lift the motherboard up and out of its slot.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
