Shark AI Ultra AV2511AE Base Filters Replacement

Written By: Frankie Medina
  • Comments: 0
Shark AI Ultra AV2511AE Base Filters Replacement

Difficulty

Very easy

Steps

2

Time Required

2 minutes

Introduction

This guide for the Shark AI Ultra AV2511AE will show the steps for replacing the base filters. This will help if there are any problems with filtering and transferring trash from the smart vacuum to the base. It is also recommended to remove these filters and clean them every couple of months.

  1. sFQTYgYpkXSw3fHv
    sFQTYgYpkXSw3fHv
    BnPc5uJXfEJTFTeQ
    siNuAIxmKX1tiiqF

    • This step is for the post-filter on the vacuum base.

    • Remove the black cover on the post-filter located on the side of the base.

    • Pull the "DOWN" tab and remove the filter.

  2. OO2bEwtFEOmI1a14
    OO2bEwtFEOmI1a14
    LrOcxLeM5hKkfP5E
    wE1LFkJHLKMTpPM6

    • This step is for the pre-filter on the vacuum base.

    • Open the white cover on the pre-filter located on the top of the base.

    • Remove the filter.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Frankie Medina

Member since: 20/09/23

325 Reputation

0 comments