Sega CD Plastic Housing Removal

Written By: Ryan Kotzebue
  • Comments: 0
Sega CD Plastic Housing Removal

Difficulty

Easy

Steps

7

Time Required

5 - 10 minutes

Introduction

The purpose of this replacement guide is to remove the Sega plastic casing to expose the internal content for further repair.

  1. 1QUEXsgwCqGeXaZb
    1QUEXsgwCqGeXaZb
    jBwkSKolEFrkbHNC

    • Using a Phillips head screwdriver remove six screws from the bottom of the console.

    • The six screws are marked.

  2. xAuxiDYbtnmDPNqo

    • Remove the two screws that attach the Genesis' connector to the rest of the console.

    • The two screws are marked in the diagram.

  3. 5HbR6uHvQnFvPjIS

    • Slide the lock tab to the left to separate the halves of the console.

  4. KGWciKcXIaHrCOUR

    • Lift from the left side to remove the top of the case.

  5. O4SBeWvDWucwsx2B

    • Using the spudger, pry the cover off of the Genesis attachment.

  6. oyZDYGSOyFfKe5fg

    • Lift the top of the case to remove the cover.

  7. OuEFoWFH2leyub1e

    • Remove the faceplate by pulling it up, then out.

Conclusion

To reassemble the device, follow these instructions in reverse order.

Author

Ryan Kotzebue

Member since: 07/10/10

271 Reputation

0 comments