Samsung WB350F Screen Replacement

Written By: Casey Bernier

Difficulty

Moderate

Steps

Time Required

No estimate

Introduction

If your screen is damaged in any way, this guide will walk you through the replacement process.

Remove the wristlet strap.
If you have difficulties use your plastic spudger. If you don't have a plastic spudger, you can also use a pen/pencil.

Open the case of the camera using your plastic opening tool.
Start on each end, working the tool into the opening and popping the casing up. Then work your way down the longer sides (top and bottom).
If you don’t have plastic opening tools, any flat plastic object, like a used gift card, can be used as an improvised alternative.

Using your Phillips #000 Screwdriver, remove one 3.2 mm screw above the menu buttons panel.
Next, remove the two 3.2 mm Phillips #000 screws to the left of the menu buttons panel.

Remove two more 3.2 mm screws on the silver panel using your Phillips #000 Screwdriver.

Flip the screen back over.
Using the plastic open tool, flip open the black retaining plastic piece holding the larger ribbon in place.

Carefully detach both ribbons by gently pulling one at a time.
The thinner ribbon isn't secured with a connector and you are able to pull it straight out.
Be sure to pull gently as you do not want to break either ribbon.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Member since: 04/03/16

131 Reputation

Broke my screen, bought a new one on the internet (ebay) and used this tutorial for replacement.

Good photos and every step is clear to follow