Introduction

Replacing the camera in your Samsung Solstice is a quick and easy project, provided you know what you are doing and have the right tools to remove it.

  1. w2JIEPpgKWXjmJVA
    w2JIEPpgKWXjmJVA
    2GgGmuAQy26GqOst
    ICParPMOGpFikRUS
    • Gently slide the cover off of the phone by pushing it upwards, in the direction of the small arrow on the back cover.

    • Set the cover off to the side once you have removed it.

  2. evo6XPIeWJ1S6omN
    evo6XPIeWJ1S6omN
    sp3Lbrer2DlaSPmr
    yQaVk21ApShX2wQN
    • This step can be accomplished without the need of a plastic opening tool. Just use your finger if you want to.

    • Wedge a plastic opening tool in between the rear end of the battery and the plastic frame.

    • Pry the battery up out of its recess and away from the phone.

  3. KERbUnxk4hCiXCLY
    KERbUnxk4hCiXCLY
    44rhNCrXWYZ5YdjQ
    • Remove the back cover by sliding the cover off of the phone by pushing it upwards, in the direction of the small arrow on the back cover.

    • Set the cover off to the side once you have removed it.

  4. v1Ixh2sLYOuZfusP
    v1Ixh2sLYOuZfusP
    tuRJanAyERYXlM3o
    pQDkLQc4u3KIux2U
    • Locate the SIM Card slot directly above the battery and below the phone camera

    • Place your thumb on the SIM Card in the slot, press down gently and slide the card away from the slot, until it comes out of the slot entirely

  5. BCJlpdRJVYTUYKbM
    • Once you have removed the SIM card, set it aside from the phone.

  6. WItU3FZXiIVRJY1s
    WItU3FZXiIVRJY1s
    aGOpjga6wtyRFMNe
    JO3dVgkCZsKnLBfE
    • Remove the six 0.4mm Phillips screws securing the midframe to the front panel assembly.

    • Grasp the the plastic midframe with your thumb and forefinger and lift it away from the phone.

  7. OlRwrlTlrf24GMoo
    OlRwrlTlrf24GMoo
    pXQCuwrpXV1WcEdE
    • This step can be accomplished without the need of a plastic opening tool. Just use your finger if you want to.

    • Use a plastic opening tool to pry the connectors from their sockets on the motherboard.

    • Gently remove the motherboard from the phone

    • Set the motherboard aside once it is free and separated from the phone

  8. lcfvCk1AsoyZrhAX
    lcfvCk1AsoyZrhAX
    TotGIJrrunbil2hg
    • This step can be accomplished without the need of a plastic opening tool. Just use your finger if you want to.

    • Use a plastic opening tool to carefully pry the camera connector from its socket on the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Colton Glyder

Member since: 05/09/14

301 Reputation

0 comments