Introduction

Your camera's screen is essential to the viewing of most camera actions. This guide will teach you how to access and remove the Samsung ST76's screen.

  1. tGA33qPNFxg3CYhU
    tGA33qPNFxg3CYhU
    5VU1WNqiGBuCxuYG
    Ngxig5gRiLI5LOkH
    • Use a Phillips head screwdriver to remove 5 screws from the camera. There are 2 4mm screws on the left side, 2 2mm screws on the right side and 1 4mm screw on the bottom.

    • Do not mix the 5 screws; they are different sizes.

  2. QZYNfWfu3CmFDGqu
    QZYNfWfu3CmFDGqu
    jv6ONY6btCPFYSky
    • Use your fingers to pull the back cover off.

  3. b4tdkRNSYDdoOXZN
    b4tdkRNSYDdoOXZN
    M1VZCnEHibhMQNWb
    • Separate the button panel to reveal the port holding the screen on.

    • Use a plastic opening tool to help with this task.

  4. aa4FqlfyZxFVhDjG
    aa4FqlfyZxFVhDjG
    2W2NglBmOpocGZXO
    • Remove the yellow cable by pulling gently upwards, away from the inside of the camera, until it separates from its port.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Angela Fierst

Member since: 11/03/15

364 Reputation

One comment

Where did you buy a replacement screen?

Demaree Wiitala -