Introduction

This guide can be used to replace any damaged back panels, access the screen, and other inner parts of the camera.

  1. tGA33qPNFxg3CYhU
    tGA33qPNFxg3CYhU
    5VU1WNqiGBuCxuYG
    Ngxig5gRiLI5LOkH
    • Use a Phillips head screwdriver to remove 5 screws from the camera. There are 2 4mm screws on the left side, 2 2mm screws on the right side and 1 4mm screw on the bottom.

    • Do not mix the 5 screws; they are different sizes.

  2. QZYNfWfu3CmFDGqu
    QZYNfWfu3CmFDGqu
    jv6ONY6btCPFYSky
    • Use your fingers to pull the back cover off.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jessica Bain

Member since: 11/03/15

393 Reputation

0 comments