Introduction

  1. MTTfykDvMqSbmg4o
    MTTfykDvMqSbmg4o
    jW6tNuSU22FQdZgX
    1DOMXLmYXMD3gfYL
    • Remove these screws from the camera using a phillips head screwdriver.

  2. A2Yary4gi2WgK2Vy
    • Lay the camera down on the table and remove the metal shell from the front.

  3. 5AIjF2GxENOioVFK
    • Wedge a spudger/flathead screwdriver inside of the shell where the screws were to pry the shell off of the back.

  4. rMIWKptAOhEGpNYB
    • Remove the shell the from the back of the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nicholas Pavao

Member since: 27/03/15

418 Reputation

0 comments