Introduction

This guide will explain how to successfully remove the screen underneath the outside shell and on top of the circuit board.

  1. YPeJaUQNWmrLsL6W
    YPeJaUQNWmrLsL6W
    16Z1XOyB3cjURGLk
    nyZNpldOjZf6QCQr
    • Remove 4 screws from bottom of camera

    • Remove 2 screws from side of camera

    • Remove 2 screws from side of camera

    • Place Screws on magnetic surface or location where they will not roll away

  2. 25YvAOnd5Bu5RhSO
    • Squeeze area noted by blue square and pull outside shell apart from remaining camera.

  3. EI1ygwLy5CJYojVn
    • Remove two screws holding screen to circuit board marked by red circles

  4. WIjyycAjCF5AUm4S
    WIjyycAjCF5AUm4S
    dD4A3xTxgKEl4RNI
    S31Iilomt2fj5AgL
    • Lift screen up such that orange circuit ribbon fully extends

    • Flip white peg up noted by blue box

    • Using tweezers gently remove orange circuit ribbon from white peg. Make sure white peg remains up otherwise ribbon may tear.

    I have Samsung s85 camera but display is not working

    Can you sell a display??

    shivamthakor446 -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Avinash Salgam

Member since: 16/02/14

597 Reputation

0 comments