Samsung PL20 LCD Replacement

Written By: oldturkey03
  • Comments: 1
Samsung PL20 LCD Replacement

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

Here is a PL20 that has a broken LCD, as well as some other issues. The repair is straight forward. The only tools used were a Phillips screwdriver and a plastic opening tool, which is optional. This camera was actually fun to work on; it was easy and took no time at all.

  1. e3vutEKKGDsRtKwI
    e3vutEKKGDsRtKwI
    LGgnXXQq1aSPmQKE
    ysemvavwFWrNJhYT

    • Here is the broken LCD. The spider crack in the glass, as well as the discoloration of the screen, is clearly visible.

    • Remove the battery and the memory card from the device, if so equipped.

    • Remove the two screws on the left side.

  2. GX4ILvUZsgW3wPg2
    GX4ILvUZsgW3wPg2
    kYGdsDTnvgv6HiCX
    u6msQHWODmrPKtMZ

    • Remove one screw from the bottom

    • Remove the two screws on the right side.

    • Use a plastic opening tool, or your fingernails, to split the casing apart. Start from the battery compartment and work your way around the case. The case should split easily.

  3. sQDCbAwrptiIpG3j
    sQDCbAwrptiIpG3j
    yZ1BSZhwCu2ObxW2
    yUSZJgtueTMGYaOF

    • Once the back of the case is removed, the LCD becomes immediately visible.

    • Remove the LCD from its holder to gain access to the connector.

    • Open the connector, and flip the black clip upwards, freeing the LCD. It can now be removed and the new one installed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

oldturkey03

Member since: 29/09/10

778333 Reputation

One comment

Great help! Screen replaced no problem. Thank you

EE61 -