Samsung MV900F Screen Replacement

Written By: Ethan Rowland
  • Comments: 2
Samsung MV900F Screen Replacement

Difficulty

Moderate

Steps

9

Time Required

5 - 10 minutes

Introduction

This guide will demonstrate eight steps on how to replace the flip screen on a Samsung MV900F Smart Camera.

  1. LS2H3FsJ6ayBAEXO

    • Slide the lock towards the middle of the camera, in the same direction of the arrow.

  2. WEaOAJwtXdSSsbvT

    • Push the blue battery holder up in the direction of the arrow.

  3. XNhXSnVBZAOPmilP

    • Pull the battery out of the battery slot.

  4. WdlmgNXkP2mgIOOR
    WdlmgNXkP2mgIOOR
    OxgKByoxdlA34Vwn

    • Use tweezers to remove the four rubber screw covers.

  5. AHPdiTNqFISFu3b1
    AHPdiTNqFISFu3b1
    ssY4Tyj2FiJZcEEs

    • Remove the four Phillips 2.381 mm screws on back side of camera and one Phillips 2.381 mm screw on the bottom of the camera, using a Phillips #00 screwdriver.

  6. 3EBmE3IYHO1baCYC

    • Remove the back casing by just carefully pulling the casing off of the camera.

  7. OKWr5Ed2j2KZGw1E

    • Use the Phillips #00 screw driver to remove the four 2.381 mm screws next to the screen hinge.

  8. LK1gJRaDoxsIbonA

    • Use plastic opening tool to disconnect screen connector from the control board.

  9. U6FWFbXcZkVXhcYB

    • Remove the old screen.

    How to replace lcd in the old screen? How to open it?

    lynda_myself -

Conclusion

To reassemble your device, follow these steps in reverse order.

Author

Ethan Rowland

Member since: 03/03/15

216 Reputation

One comment

Anyone an Idea where I can buy a cheap new display for that cam?

Bernhard Prieler -