Introduction

  1. jLmUiDAD3ENTfwZM
    jLmUiDAD3ENTfwZM
    YeBRtvDwcTwRNCJt
    • Pry the back cover off with a plastic opening tool, or your fingernail, in the indentation on the bottom of the device.

  2. NhdtGV4kWkDRXfMf
    • Lift the back cover away from the main body of the phone.

    gvjjdssvbhhhh

    Test -

  3. i3GjuKqc5T1Usnwd
    • Insert your finger in the groove below the battery.

    • Press the battery toward the audio jack while lifting upward and away from the phone.

    • Remember to place the battery back with the copper contacts on the battery lined up with those on the phone.

  4. YOsvbuwQDSSaiEw4
    YOsvbuwQDSSaiEw4
    UlOABca1gPkjDCKq
    4bJDWVRxCfnVBBEF
    • Using your fingernail, push the microSD card slightly deeper into the slot, until you hear a click.

    • The removal of the battery is not required for this operation; therefore, step 3 can be skipped if just replacing the microSD card.

    • After the click, release the microSD card to allow it to pop out.

    • Remove the microSD card from its slot

    • When placing the microSD card back in the phone, make sure the card clicks in place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mounir Karmada

Member since: 07/07/15

465 Reputation

0 comments