Samsung Galaxy S6/S7 Edge Screw identification

Written By: Nick Kane
  • Comments: 1
Samsung Galaxy S6/S7 Edge Screw identification

Difficulty

Easy

Steps

3

Time Required

5 minutes

Introduction

Samsung has used the same screws in all mobile phone from the S3 - S5 models including the minis. The S6 series brought about new screws and if mixed up screws in too far and causes damage.

  1. M2AJLhcBxnLxCkyU

    • 3.2mm S6 / S6 Edge & S7 series screws are 3.2mm.

  2. tgBrQTdJNTsjqxMH

    • S3, S4, S5 screws are 3.8mm, an extra 0.6mm over the S6 and S7 series.

  3. evq1y4GDb52mUGlH

    • Using 3.8mm screw around edges S6 / S7 Edge will cause damage to the LCD as per photo. Only ever use 3.2mm phillips head screws on S6 and S7 screen replacements.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Nick Kane

Member since: 20/02/15

1017 Reputation

One comment

Some of the screws in my S6 seem to be even shorter than 3.2 mm . Is that right? And in which holes do those fit? I think I mixed them up...

jellemaris -