Tools
Parts
-
-
Remove the back cover at first. It's a pity that we only have a S6 with broken back cover to show how to do camera lens glass replacement.
-
-
-
And then pry up the camera lens ring from bottom right corner. There is some adhesive underneath. Be careful and avoid scratching the metal ring with sharp tweezers.
-
At last, push the camera lens glass by your finger or with a spudger and remove it finally.
-
-
-
Now it's time to place the new camera lens.Peel off the upper film and assemble the glass with the ring.
-
-
-
Peel off the bottom film and we can stick the new camera lens assembly back.
-
And one tips: you will need a piece of new back cover sticker because the old one maybe can't be used any more.
-
That's the guide to replace S6 camera glass and camera ring together.
-
-
-
If your S6 camera lens was broken heavily, just remove it directly but very carefully. Don't hurt the camera or scratch the metal ring.
-
-
-
And then stick on the new camera glass and done the replacement.
-
That's the guide for replace S6 camera glass only.
-
To reassemble your device, follow these instructions in reverse order.
27 comments
Is it possible to replace just the lens without taking off the back cover? Like can I just use a suction tool to pull off the broken lens and put in the new one?
Yes, that is possible!
Robin -
I am wondering the same thing. I believe it would work. Don't see the need in pulling the back cover to replace a piece of exposed glass.
4freese -
Yes. It can be done. I did it using a hair dryer to warm the lens and peel if off gently, starting in one corner. If it seems reluctant to come off you may need to heat it a little more. Be careful not to damage to outer metal ring (as I did) and then replace the glass lens as described.
vicbliz -