Introduction

  1. v6P3IL65vPaNOV2O
    • Remove the single 3.0 mm Phillips #00 screw securing the motherboard to the midframe.

  2. rlNULZdO31NOikg2
    rlNULZdO31NOikg2
    XpSpdmjnJuBRfiAL
    OZDGXq1SbVamTNy6
    • Pull, but do not remove, the motherboard away from the midframe to allow access to the connectors on the rear.

    • Do not attempt to fully remove the motherboard as it is still attached to the interior midframe by the Micro-USB port daughterboard connector.

    • Lay the motherboard on a clean flat surface and support the interior midframe with one hand, leaving the other hand free to work on the motherboard assembly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

Member since: 19/10/12

465332 Reputation

0 comments