Samsung Galaxy Mega Midframe Replacement

Written By: Aaron Fulton
  • Comments: 4
Samsung Galaxy Mega Midframe Replacement

Difficulty

Moderate

Steps

4

Time Required

2 - 5 minutes

Introduction

This guide instructs on how to replace a damaged back panel assembly. The back panel assembly provides the protection for all the internal components of the device. Most components of this device require the removal of the back panel to gain access to them.

  1. XecCKLTBNgmfBfxY
    XecCKLTBNgmfBfxY
    XSAJi14bTsEwBNRK
    p4ArZV5tLM4AHuJS

    • Before starting, ensure device is completely turned off.

    • On the back of phone, locate the slot on the top left corner.

    • Insert plastic opening tool or fingernail and pull up on the back plate.

    • With the corner released, slide your finger around the device between the back plate and the phone to release connectors.

    Bonjur vule vondre de telefon samsung galaxy mega ecron

    bucuresteanugigel -

    samsung galaxi mega

    bucuresteanugigel -

    0751571718 samsung galaxi mega

    bucuresteanugigel -

  2. DcNvXh4EcjjtCfci
    DcNvXh4EcjjtCfci
    vwRdREmKIhPahK1W
    CCSYILvRFECQlZCC

    • Insert fingernail into the slot on bottom of battery and gently pull up.

    • Remove the battery.

  3. eOrSgSr5OVQiXAKs
    eOrSgSr5OVQiXAKs
    DjobM4jA3VOxsuol
    VY4sZVV4jniAJnpb

    • Remove the 14 3.45 mm Phillips #000 screws from the assembly.

    • Gently, insert plastic opening tool into seam above the volume buttons of your phone.

    • You may substitute metal spudger for plastic opening tool to first start the opening of the seam. This may cause exterior cosmetic damage.

    If you insert a spudger from the battery compartment seam, you can start the opening without damage to the outside.

    Ted -

  4. vyKCve3BNHo3tNHU
    vyKCve3BNHo3tNHU
    2xQigLcTNJHEbqmH

    • Slowly slide plastic opening tool around the device to release all the connectors internal to the device.

    • The device should easily come apart after the plastic opening tool is slid around the entire device.

    • During reassembly, ensure volume and power buttons align properly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Aaron Fulton

Member since: 04/02/16

1246 Reputation

0 comments