Introduction

  1. Kbe6xYKIosxh4KEY
    Kbe6xYKIosxh4KEY
    G3UyHOgnKTldDysd
    • Remove the back of the device by pulling on the tab in the top left.

  2. VI2TQsh5aUxKBajV
    • Using the Phillips #000 screwdriver, remove ten 4.2 mm screws.

  3. PMd14C2nc5QsRmij
    PMd14C2nc5QsRmij
    m233EknFPpKanVHU
    ZlkVNHvWC1MGdDeK
    • Lift up the back of the device with the iFixit opening tool and disconnect it from the front.

  4. DHicZ54HZutQCDiR
    • Remove single screw from back of device. This is the only screw that must be removed to take off this piece.

  5. XIw3jqk6IH3GeAq3
    • Make sure to pull up all of these parts in order to properly take off the next piece.

  6. PHtbZHks1j4ViTMp
    PHtbZHks1j4ViTMp
    NhHSoTW4XbXLXsFN
    • Pull the blue/green piece away from the black piece. They should not need any force to be removed. The next step will deal with using the green/blue piece from the second picture.

  7. 5XCjmjD3VKGvMuIK
    5XCjmjD3VKGvMuIK
    CRXJWRXqmoCIxVdA
    • Flip over the piece (180 degrees). Remove the boxed out piece. This is the front facing camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Justin Thompson

Member since: 05/02/19

190 Reputation

0 comments