Introduction

  1. TIwkBTVaq4VM2tRS
    • Start by removing the back cover by using your thumbnail to pry the cover off the midframe.

  2. 4T2TogiZYDOvSgCb
    4T2TogiZYDOvSgCb
    DavqTabWhChlirqA
    XmxRkwZAyuvXEoQp
    • Note: one of the screws is hidden under a plastic sticker.

    • Remove the five 4 mm screws with a Phillips#00 screwdriver.

  3. C4kDJbSXsZRXZBdy
    • Remove the battery with plastic opening tool

  4. y4yJJEKNPjs6YZl1
    y4yJJEKNPjs6YZl1
    NjNXnyPoDvN2rXEY
    • Using the plastic opening tool pry into the bezel to remove the mid-frame

    • Continue moving the plastic opening tool around the mid-frame to separate it from the display assembly.

    • Be gentle the plastic mounting clips are very fragile. Pay extra attention when working around the volume button.

  5. 6O15eseEiwB1HBJT
    • Once you have separated the mid-frame it should look like this.

    • Replace the old mid-frame with the new one and follow the steps in reverse.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Charles

Member since: 07/10/14

133 Reputation

0 comments