Introduction
Tools
-
-
Turn the phone off and make sure your hands are clean. Use your thumb nail or a plastic spudger to pry open the back cover,
-
-
-
Remove the five 4 mm screws with a Phillips#00 screwdriver.
-
Make sure you remove the sticker hiding the screw on the left bottom corner.
-
-
-
Using the plastic opening tool pry into the bezel to remove the mid-frame
-
Continue moving the plastic opening tool around the mid-frame to separate it from the display assembly.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.