Samsung Galaxy A51 Screen with Frame Replacement

Written By: ZFix
  • Comments: 1
Samsung Galaxy A51 Screen with Frame Replacement

Difficulty

Moderate

Steps

7

Time Required

40 minutes

Introduction

Samsung Galaxy A51 - how to disassemble the device and change broken screen

  1. NeHxuYWHT6ygCDUh
    NeHxuYWHT6ygCDUh
    iaPhagFOs2U5FrVi

    • Samsung Galaxy A51 - the new spare part.

  2. dPYyKyIBM6UI1ZF2
    dPYyKyIBM6UI1ZF2
    RYRiNtQ3aH2IWNDq
    RpVMcayifa4CMNZH

    • Warm up the device to soften the adhesive.

    • Use suction cup and plastic tools (playing cards) to separate the back cover.

  3. EOGlpLnZeha5wk3P
    EOGlpLnZeha5wk3P
    6WnMsbAujcj2Fs6o
    CSgXV4d4HywOyWqf

    • Remove the SIM Tray.

    • Remove 13x Phillips screws.

  4. qcVMcdPSFbjPmGpH
    qcVMcdPSFbjPmGpH
    nZN4xoCRnRVjDsWj
    bpEHyj4TDuuKRWgS

    • Only use plastic tools to separate the metal frame.

  5. SDHXeJUrdaW1cybJ
    SDHXeJUrdaW1cybJ
    gQyPdCT43VhA6wpT
    hXuPWdP55oAaTGoD

    • Test the new spare part.

  6. HMVqaLAbON1ibIC5
    HMVqaLAbON1ibIC5
    rCWq2x2exVqQODDU
    ou44LoB1ps4FCILy

    • Disconnect and remove the main flex cable.

    • To remove the fingerprint sensor - remove two Philips screws and disconnect the flex cable.

    • Disconnect coaxial antenna cable.

  7. cSYySOvJ2xYivgMX
    cSYySOvJ2xYivgMX
    qFLNYOPSSS4Adbcx
    DKjMgbknk3Oo1RTD

    • Remove the Sub -board? Charging board.

    • The motherboard is secured by one small black screw, remove it to separate the board.

    • Don't forget to transfer the receiver.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

ZFix

Member since: 09/12/13

191079 Reputation

One comment

Hallo, i made repleacment, display went well ( touch and functions, but after turning on the display was like in shadow and side lines were on white kind a yellow fade, what it could be? is it by bad replacement, display or something else?

Vojtěch Kolář -