Samsung Galaxy A20e Display Assembly Replacement

Written By: ZFix
  • Comments: 1
Samsung Galaxy A20e Display Assembly Replacement

Difficulty

Moderate

Steps

12

Time Required

25 minutes

Introduction

Samsung A20e - Broken Screen Replacement

  1. Sx3Q1rhvCFHgnGtI
    Sx3Q1rhvCFHgnGtI
    HO4eCrSGILBnZjyw

    • This is Display Touch Screen Assembly with Frame

  2. 5QnNu4GweyFJICmL
    5QnNu4GweyFJICmL
    Zt5eXxRI5aeCEiDA
    ylDH5XQcFkoj6aSy

    • Remove the SIM tray

    • To remove the back cover use a plastic opening tool

    • When you remove the back cover, press the Touch ID to unstick it from the back cover

  3. FQW5elMgJXWJA4WG
    FQW5elMgJXWJA4WG
    sXo1RmVAmGPbM2iD
    MKvJdWNU6BEBAWNf

    • With a Phillips Screwdriver remove all the screws

    • With a Plastic Opening Tool:

    • Remove the Antenna Assembly

    • Disconnect and remove the Touch ID Fingerprint Sensor

  4. WOPNwjNQqSQcDRQb
    WOPNwjNQqSQcDRQb
    mJoBDrK1vRnC6GjP
    bqrCt4yFpNnJh2mc

    • Remove the Logic Board Plastic Cover

    • Remove the Sup-board Plastic Cover

  5. xKSAXTElxUHeLN11
    xKSAXTElxUHeLN11
    PPnd1xvrQhHFU5aS
    T6kuGDiprOgRAk5g

    • Its time to test the new spare part

    • Do not forget to disconnect the battery before you start working on the device.

  6. UbturtTwSZyabbLt
    UbturtTwSZyabbLt
    rO6fTqNQGLqTNraH
    ZdMBVXZhXyqJZLco

    • Disconnect the Battery

    • Disconnect the Sup-board Flex Cable

    • Disconnect the Coaxial Antenna Cables. Do it very carefully because you can easily damage them

  7. lPgwHSPa11ypy5FE
    lPgwHSPa11ypy5FE
    XMkuQITZUqYBVMuP
    tJZTbvwgeYxDXbfF

    • Remove the Sup-board Flex Cable

    • Disconnect the Volume buttons Flex Cable

    • Gently remove the Logic board. Be careful for the cameras

  8. Py1RRmkRQTmkTPjg
    Py1RRmkRQTmkTPjg
    dwGFjUDssEt2VeEH
    lZK6rb3RNfnTubFl

    • Use Hot air to soften the adhesive and gently remove the sup-bord

    • Its better to use a plastic tools

  9. O4BHdbNhDORnAnBE
    O4BHdbNhDORnAnBE
    sWZtKLMexRGH4bSu
    XCB2gXv15q4erSYE

    • To remove the Battery use a few drops of alcohol and warm the device.

    Use isopropyl alcohol 99% specifically 😁

    Jason Thompson -

  10. 5uVHiGQESMBgWaJ2
    5uVHiGQESMBgWaJ2
    3RWHUhaH1ZWPrnPe
    SnWOdlOAkXOsjFAQ

    • Now you have to transfer:

    • Receiber

    • Vibromotor

    • Loudspeacker

    • Remove the transport tapes from:

    • Silicon Thermal Pad

    • Front Camera Hole

    • Use Hot Air to do this easily

  11. qZGbasAFRynETDbE

    • Use Double side Adhesive tape to install the battery to the new frame

  12. 4WIWWHST2kElWmyI

    • "All's Well That Ends Well."

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

ZFix

Member since: 09/12/13

191079 Reputation

0 comments