Samsung Eternity Motherboard Replacement

Written By: Kevin Huang
  • Comments: 0
Samsung Eternity Motherboard Replacement

Difficulty

Moderate

Steps

10

Time Required

15 - 25 minutes

Introduction

You will need to find a clean area to work in and have the necessary tools. Follow this guide to gain access to your cellphone's motherboard.

    • Remove the back battery cover.

  2. DFVssrCsaalAmneL

    • Using the Phillips #00 screwdriver, remove the phone's battery.

  3. TwnBImxVHmGkTgel

    • Remove six (4.28 x 1.25)mm screws using the Phillips #00 screwdriver

  4. RRsRo2iNI43NWHNY
    RRsRo2iNI43NWHNY
    p3CxvlR2V3bsgrqG

    • Continuing to use the Phillips #00 screwdriver, gently pry the silver plastic back plate from the body of the phone.

  5. ntis6DaKILpRJg3O

    • It is very easy to rip motherboard cables and damage fragile motherboard clips. Be careful when you are removing every component.

    • Pull the antenna plug out of its socket.

  6. rJy6SoYMbHqUutLZ
    rJy6SoYMbHqUutLZ
    oCqEXrkWOcjTgDDy
    PtsudUFkutw2IvRl

    • Pop the two black hinged-release levers toward their ribbons, then slide the ribbons out.

  7. 4AJFfCnUNbEQMDQs

    • Pop the red hinged-release lever away from its ribbon. Then pull it out.

  8. EYvIrJuPY2Bk1dKf

    • Peel the button sensor on the side of the motherboard off of the case.

  9. 6SJGqYHOWK4FKOSL
    6SJGqYHOWK4FKOSL
    Swtmsfo1Z1LxAgfH
    1PQAwJgXEdBsbrJD

    • Slightly pull up one side of the motherboard.

    • Pull the button/microphone plug out of its socket.

    • Pop the red hinged-release lever away from its ribbon, then slide the ribbon out.

  10. CjntDJeUScHl2GKV

    • You have successfully removed the motherboard from the phone.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Kevin Huang

Member since: 20/04/11

11 Reputation

0 comments