Samsung Eternity Antenna/Speaker Replacement

Written By: Matthew Kidd
  • Comments: 0
Samsung Eternity Antenna/Speaker Replacement

Difficulty

Moderate

Steps

10

Time Required

15 - 20 minutes

Introduction

You will need to find a clean area to work in and have the necessary tools. Follow this guide to gain access to your cellphone's antenna/speaker module.

    • Remove the back battery cover.

  2. DFVssrCsaalAmneL

    • Using the Phillips #00 screwdriver, remove the phone's battery.

  3. TwnBImxVHmGkTgel

    • Remove six (4.28 x 1.25)mm screws using the Phillips #00 screwdriver

  4. RRsRo2iNI43NWHNY
    RRsRo2iNI43NWHNY
    p3CxvlR2V3bsgrqG

    • Continuing to use the Phillips #00 screwdriver, gently pry the silver plastic back plate from the body of the phone.

  5. NSbmKuMQ3qnLAqYg

    • Pop the antenna plug off of its socket with a pair of metal tweezers.

  6. hnXvFwB26cnExQtE

    • Peel off the Identification sticker.

  7. fkowSB1ta4uUTsis

    • Peel the button sensor on the side of the motherboard off of the case.

  8. DevDaeRLBEvehyyY

    • Pop the speaker plug out of its socket.

  9. YnYRaU2cZDt6DLDM

    • Pry the antennae/speaker component out of its casing. You need to use a little force to get the piece to pop out.

  10. 4GpAnnGsQBWHVg3E

    • You will now be able to replace the antenna/speaker module.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Matthew Kidd

Member since: 20/04/11

70 Reputation

0 comments