Introduction

  1. cAZFJAvNWmKGo1FV
    cAZFJAvNWmKGo1FV
    TfCK4kGwvwxIkRFi
    Pe5GeghPTSTkqfVq
    • Hold down the power button until the device powers off

    • Close the device and flip it over

    • Remove the four rubber sockets near the corners of the device

    • Then remove the four 4.6 mm Phillips #00 screws

  2. xZGSe13JSnISOYfF
    xZGSe13JSnISOYfF
    MIUNEJEcQVyxMBuT
    • Use the metal spudger to pop the back off. Near the hinges is typically an easier place to start.

    • Continue along the edges until the back is completely detached.

  3. daPrRCmIKlD1kcUW
    daPrRCmIKlD1kcUW
    iCNmUSfwVernnwQB
    • Locate the long grey box with the black band, which is labeled "Laptop Battery."

    • Remove the gray piece labeled "bracket battery BA61 - 03983A" located over the golden band connecting the battery and motherboard by unscrewing the two 4 mm Phillips #00 screws

  4. Nt2qKTdsdWaHNaUP
    • Unplug the golden band coming from the battery to the motherboard.

    • Using the Philips #000 remove the four 4mm screws holding the battery in place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Austyn Akin

Member since: 08/09/23

261 Reputation

0 comments