Introduction

If you carry a Samsung Admire, this guide can help you step by step on how to replace your phone's screen if it ever cracks, feels in any way uncomfortable, or is unadjusted.

Before using this guide make sure:

  • to have the correct Samsung Admire phone model (Samsung Admire SCH-R720)
  • to power off your phone completely and disconnect any external power sources
  • to have the screen replacement ready ( please complete research to make sure you have correct screen replacement)

*

  1. shqtphW32q6mNTqO
    • Slide your fingernail or plastic opening tool under the slit and pull the cover up.

  2. UsypDLbDbEU2cOVf
    • Place your fingernail or plastic tool into the hole beneath the camera and carefully lift out the battery.

  3. YfIyJYj1mxBJTDIs
    YfIyJYj1mxBJTDIs
    Fb1BPFYFlMLctZE1
    cuEYUJ2RFCeOyMXv
    • Use a Phillips #00 precision screwdriver to remove the six screws from the back of the phone.

  4. dIKATADNiRrjKqLc
    dIKATADNiRrjKqLc
    vv52PKKMudf5yX2W
    PKhYLccJulHaUGLn
    • Use the plastic opening tool to remove the inside back cover.

    • Use the plastic opening to pry the front and the back case apart.

    • As you lift the cover, move the plastic tool around the phone to pry up all of the screen.

    • Carefully disconnect the ribbon cables and slowly lift the inside back cover to remove it.

  5. SrFeAGnpnUQ4pQCg
    SrFeAGnpnUQ4pQCg
    vV2pL3U3JAZrXoJ1
    xpPRlektaKJLxEKE
    • Lift the motherboard slowly.

    • Carefully disconnect the volume button from the motherboard.

    • Disconnect the two ribbon cables from the back of the motherboard.

  6. bLLxRhODXaQ64eUP
    bLLxRhODXaQ64eUP
    pFdnJqBN4s6irlE3
    yphMiTjf1EC1X4ic
    • Pull back on the five clips on the sides of the phone to remove the shield.

    • Be careful not to break the ribbon cables.

  7. nb2gbcNv3qmKJgBZ
    nb2gbcNv3qmKJgBZ
    ytmNIiDLw1UIBO5i
    BfGDsrvgYVbZ5eGs
    • Use the plastic opening tool to unlatch the ribbon cable to disconnect it.

    • Place the plastic opening tool under the edge of the screen and lift the screen up carefully.

  8. BtRUTKdjUDDRb1IW
    • Insert new screen into the phone frame and reconnect the ribbon cable.

    • Follow steps in reverse order (omitting step eight) to reassemble the phone.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Thao Uyen Do

Member since: 20/01/15

896 Reputation

0 comments