Introduction

  1. SYfTxka46gUcORUL
    • To open the back cover of the phone, use your fingernail or plastic opening tool under the slit to pull the cover up.

  2. a6WVuW6FGSp2feDI
    • Carefully remove the battery by placing your fingernail underneath the hole and pull out the battery.

    • Your hands should not be wet.

  3. IX52SQrbYu4CDXhL
    IX52SQrbYu4CDXhL
    j4O5ZWkxORubPLGG
    dBesyckQXwCSQlK3
    • Use the Phillips #00 Precision Screwdriver to remove the six screws in the back of the phone.

    • Be careful not to lose the screws, so place them on a magnetic mat.

  4. IQc3hekdFghuKgSg
    IQc3hekdFghuKgSg
    qYIuSGNk5C5Rycqc
    x1ufivasYOCbbv3Q
    • Use the Plastic Opening tools to remove the inside back cover.

    • Place the Plastic Opening tools on the outside rim of the inside back cover.

    • Carefully lift the cover and circle around the rim to open the inside back cover completely.

    • Carefully disconnect ribbon cables and slowly lift the inside back cover to remove it.

  5. q3V2m4jWcSSGRhXG
    q3V2m4jWcSSGRhXG
    KltxK2iNCPlUyAs2
    hmusDE1l3xbFvGHR
    • Lift the motherboard slowly.

    • Carefully disconnect the volume button away from the motherboard.

    • Disconnect the two ribbon cables from the back of the motherboard.

    • Remove the motherboard completely from the phone

Conclusion

To reassemble your device, follow these instructions in reverse order.

Thao Uyen Do

Member since: 20/01/15

896 Reputation

0 comments