Introduction
-
-
Remove the back panel of the device by taking out the seven screws on the back panel of the device.
-
Four of the screws are under the rubber feet so they will need to be removed. To remove the feet, pry them off with the spudger.
-
-
-
Locate the wireless card. It is shown highlighted in picture one.
-
Detach the black and white cords connected to the wireless card and unscrew the screw holding in the card. They are shown highlighted in picture two.
-
Pull the card out of its slot and insert the new card. Reattach the wires and reassemble the device. Note: the white wire connects to the terminal closer to the screw and the black to the other terminal.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
