Safety Precautions (For Battery Disconnect)

Written By: Alex Diaz-Kokaisl

Difficulty

Moderate

Steps

Time Required

No estimate

Introduction

Prereq for turning off the laptop and for optionally putting the laptop is battery disconnect mode in the BIOS.

Unplug all cables and fully shut down your laptop.
If your repair requires a spudger, a T5 Torx, or a Phillips screwdriver, you can use the included Framework screwdriver. Whichever works best for you!
Framework recommends that you put your laptop into battery disconnect mode in the BIOS whenever removing the battery. Read how to do that here.
To disable this mode, click here.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Member since: 16/01/22

117889 Reputation