Introduction

This guide is to be able to access the Trigger Assembly if needed to change or replace the trigger.

  1. dJjVWPbWijk6RN2F
    • Use a Torx T20 screwdriver to remove the nine 16.5 mm screws around the trigger assembly.

  2. Pcj1A65qgZOrg5ZK
    Pcj1A65qgZOrg5ZK
    2X3vZhOpiJF1lgBb
    • Use a Torx T20 screwdriver to remove the two 16.5 mm screws near the trigger.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Enrique Huet

Member since: 11/02/22

85 Reputation

0 comments