Rosewill NEON M62 Side Buttons Replacement

Written By: Sean Turk
  • Comments: 0
Rosewill NEON M62 Side Buttons Replacement

Difficulty

Moderate

Steps

10

Time Required

8 - 10 minutes

Introduction

This is a guide explaining how to take the side buttons on the Rosewill NEON M62 mouse off. This repair should be performed if the side buttons to the mouse are visually broken or the bottoms do not respond when clicked.

  1. sCWWMNXZ1ISW2Eb3

    • Place the mouse so the bottom is facing upwards.

    • Remove the rubber skates.

    • These are not shown in the picture since they were missing from the device.

    • Remove the two 5 mm screws with a Phillips #00 screwdriver.

  2. DqR5tgX1LeEHdFpg

    • Use the opening tool along the side of the mouse to open up it.

    • This may take multiple attempts to do so; be patient and careful not to break the mouse.

  3. kPcPjqwM5LFOUNB4
    kPcPjqwM5LFOUNB4
    Hrg3CnCQKRmDnUUb

    • Loosen the top and bottom half of the mouse with the opening tool, and slowly pull up the bottom half of the mouse.

  4. TRgt4n2qOQ6TcLCN
    TRgt4n2qOQ6TcLCN
    sKkhduSdRbwTAVrI

    • Hold the top half of the mouse with your non-dominant hand.

    • With your dominant hand, push an opening tool into the gaps in the panel.

    • Pry the panel off.

  5. DrFT23ntqcA3knrl

    • Using the opening tool, take the mouse 1 and mouse 2 buttons off the top of the mouse.

  6. hkx5S6vfCFaQnrWa

    • Remove the mouse 1 and mouse 2 buttons.

  7. A2ArThDOGtCpPt16

    • Place the mouse on its back.

  8. UTP12EmPo1tiZ5Wv

    • Move around the mouse piece with an opening tool, and loosen up the piece.

  9. EOqEJjBCQLYSQfeg

    • Grab the mouse piece and take it out.

  10. jZrrQwqmeA6XeeWG

    • You're now ready to replace the side buttons.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sean Turk

Member since: 16/03/23

217 Reputation

0 comments