Rosewill NEON M62 Bottom Panel Replacement

Written By: Joshua Alves
  • Comments: 0
Rosewill NEON M62 Bottom Panel Replacement

Difficulty

Moderate

Steps

3

Time Required

8 - 10 minutes

Introduction

This guide explains how to completely teardown the Rosewill NEON M62 mouse. This repair should be performed when something needs to be replaced internally.

  1. sCWWMNXZ1ISW2Eb3

    • Place the mouse so the bottom is facing upwards.

    • Remove the rubber skates.

    • These are not shown in the picture since they were missing from the device.

    • Remove the two 5 mm screws with a Phillips #00 screwdriver.

  2. DqR5tgX1LeEHdFpg

    • Use the opening tool along the side of the mouse to open up it.

    • This may take multiple attempts to do so; be patient and careful not to break the mouse.

  3. kPcPjqwM5LFOUNB4
    kPcPjqwM5LFOUNB4
    Hrg3CnCQKRmDnUUb

    • Loosen the top and bottom half of the mouse with the opening tool, and slowly pull up the bottom half of the mouse.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Joshua Alves

Member since: 16/03/23

97 Reputation

0 comments