Roku 3 Motherboard Replacement

Written By: Samantha Miller
  • Comments: 4
Roku 3 Motherboard Replacement

Difficulty

Easy

Steps

6

Time Required

25 minutes

Introduction

All individual parts can be replaced on the motherboard as well. Please see additional guides if needed.

  1. BKeyQNTMAKaMQqRg

    • Place the Roku 3 on the table face down and orient it so you can correctly read the writing.

    I had face the same problem in my Roku Streaming Device, so I looking for a solution and I found in internet, https://roku.techpal365.com, this website have the solution for your issues even you can also call to their toll free number.

    Praba Karan -

  2. LQxVIsXNmR4SOJYn
    LQxVIsXNmR4SOJYn
    KFPp3ZiIMWEAhqqD
    Zs6qVAyxXBW6r3Sr

    • Pull back the rubber protection in the top right corner to locate the screw.

    • Repeat with the bottom right corner and bottom left corner.

  3. gCO6GIrw4wK4WWaN

    • Remove the 9 mm screws from the three corners with a Hex 1.3 Screwdriver.

  4. OiTktGAUwQemimol
    OiTktGAUwQemimol
    NEdfmwCXN6ZEAMMT

    • Open the device by gently lifting the bottom half away from the top half of the device.

  5. YTkJYqkoLYJEuN6U

    • Use your fingers to carefully lift the motherboard from the top half of the device.

  6. ZWJKqTSeZsYJXPTH
    ZWJKqTSeZsYJXPTH
    YKT6wIPJnVZKLW4U

    • Pull away the IO shield from the motherboard using your hands.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Samantha Miller

Member since: 06/10/16

287 Reputation

3 comments

Buenas tardes exelente guía

Elias Herrera -

06xcat -

Great where to you get the motherboard?

Joseph Pigott -