Introduction
This is a step-by-step guide that will walk through the process of replacing the camera sensor on the Ring Doorbell 3. The camera sensor is a component that detects motion in the surroundings, triggering motion alerts and video recordings. Problems with the camera picking up motion could be the result of a camera sensor problem. More information for solutions to these issues can be found on the Ring Doorbell Troubleshooting Page. Since the device needs to be taken apart to access the parts, some users may not know how to dismantle it, which is where this guide can come in handy.
-
-
Look at the bottom of the device and locate the arrow.
-
Use your fingers to push the silver faceplate in the direction of the arrow.
-
-
-
Remove the 6 screws with a Torx T6 screwdriver.
-
Remove the 2 screws with a Torx T5 screwdriver.
-
-
-
Desolder these three spots with 4 points and remove the solder.
-
Carefully peel off the camera sensor to remove it
-
To reassemble your device, follow these instructions in reverse order.
