Ring Spotlight Cam Battery Motion Detector Replacement

Written By: Marisol Esparza
  • Comments: 0
Ring Spotlight Cam Battery Motion Detector Replacement

Difficulty

Moderate

Steps

7

Time Required

15 - 30 minutes

Introduction

A step-by-step guide for motion detector replacement on a Ring Spotlight Battery-Powered Cam .

  1. aXNxJGXYqiIW6Onm

    • Turn Ring Spotlight Cam to the posterior side and flip upside down

  2. 163hGVRoomBKTfGq

    • Press down on top button and open upward

  3. rfArcS6ugFRI6jhR

    • Make sure to remove the batteries in the Spotlight cam before proceeding with this step!

    • Open the Spotlight Cam upward and remove the two screws with a Phillips #1 screwdriver.

  4. nEwAkSoEhnFv5Obd

    • Remove the two screws down the middle and lift the middle component off

  5. 2vAyTVWH6XS5YB2M

    • Remove the remaining 10 screws that are around the border under the tape.

  6. 1w1XTxyBFULNEW6g

    • Gently close the top of the lid

  7. e1VDouay1cDBjITM

    • Remove the top lid and replace the LED light

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Marisol Esparza

Member since: 17/01/19

37 Reputation

0 comments