Ring Spotlight Cam Battery Lights Replacement

Written By: Smoo Rena
  • Comments: 1
Ring Spotlight Cam Battery Lights Replacement

Difficulty

Difficult

Steps

3

Time Required

15 - 35 minutes

Introduction

If you are having trouble with the motion-activated lights and you would like to replace them, follow the 4 steps that are provided. It will take approximately 15-35 minutes.

  1. IlUWHkHMNaae5IjI

    • Remove the top plastic pad by peeling it off with a metal spudger.

  2. GVB2QZYbpHAW61r1
    GVB2QZYbpHAW61r1
    xCnnOsiBEiLTH3ch

    • Remove the 7 PH00 screws around the four corners with PH00 of the lid.

  3. Dd6NEtglUUxHDhMF

    • Use the metal spudger set to break the glue lining and the motion sensor will pop out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Smoo Rena

Member since: 17/01/19

222 Reputation

One comment

this showed nothing about replacing the light bulb

Martha “purplemarty” Ewell -