Revlon One-Step Hair Dryer Brush Disassembly

Written By: Xochitl Sandoval
  • Comments: 5
Revlon One-Step Hair Dryer Brush Disassembly

Difficulty

Easy

Steps

7

Time Required

No estimate

Introduction

Teardown of the Revlon Hair Dryer Brush

  1. QKtxQeLhOxJJuGCk

    • Pull Pink Tabs

  2. lsM1L3PJ3YU1THol

    • Remove the Two Phillips screws, one on each side.

  3. 3xITdx3VvYjZdO3G

    • Pull Hair Brush Portion

    Do not pull apart the halves of the handle portion.

    Xochitl Sandoval -

    You must lightly pull apart the two halves just enough for the brush to pass

    Alexis Hakes -

  4. 5oYJM5DJATH52KCY
    5oYJM5DJATH52KCY
    QDLXIgwHnIfhWvPI

    • Twist and pull the Air Filter to remove. It is held in place by two lugs and holes (Circled blue on photo). Quite difficult to remove but it will come if enough force is applied

    • Slide the Power Indicator/Ring.

  5. K2Ajp6bqifcdaXjD

    • Remove the Two Phillips screws, one on each side.

    Now remove the handle portion of the dryer.

    Xochitl Sandoval -

  6. OFtn1ReSGFP4LBHI

    • Remove Power Cord

  7. mNEXWH5THjOeFOQZ

    • Remove final Philip screw.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Xochitl Sandoval

Member since: 26/04/11

172 Reputation

2 comments

Couldn’t remove air filter

moudd9 -

Does Revlon sell a replacement brush?

Ron H -