Introduction
The same instructions can also be used to replace the original hard drive (SATA 500 GB, 5'400 rpm) with a more powerful hard drive or an SSD hard drive.
Tools
Parts
-
-
Using the Phillips # 1 screwdriver, remove the hard drive cover.
-
Grasp the transparent tab to separate the hardtop from the SATA connector.
-
-
-
Using the Phillips # 1 screwdriver, remove the four screws securing the plastic cover.
-
This cover is then reinstalled on the new hard drive.
-
Conclusion
For reassembly, follow the instructions in reverse order.