Introduction
Only requires removing a few screws. No special tools required.
Tools
-
-
Flip the camera so that the bottom is facing you.
-
Take a spare coin and unscrew the battery cover off.
-
-
-
Remove two 4.8mm screws.
-
Remove one 3.4mm screw.
-
Remove one 2.65mm screw.
-
Lift off the back cover.
-
-
-
Remove three 3.5mm screws.
-
Remove two 3.8mm screws.
-
Remove one 6.35mm screw.
-
Remove one 4mm screw. Lift off the disk.
-
Remove one 5.11mm screw.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
One comment
good advice, will use, have multiple Minolta cameras to work with.
Hi just checking which type of batteries are required? You have two types listed, the SR44/LR44 (I understand those are the same types of batteries) then the CR-1 / 3 /3N 3V battery? How many batteries do I need and which type will I need? thanks!
Juliette Perry-Dumarquez -