Introduction
Tools
-
-
Gently pull on the top plastic plate of the device and carefully unplug the white cord from the circuit board.
-
-
-
Gently pull up on the right plate on the mouse; separating it.
-
Carefully repeat this step for the left side.
-
-
-
Take your nylon spudger to gently pry the battery pack from the device.
-
Remove the foam on the battery shell for your new battery.
-
-
-
Plug the cord of the new battery into the socket found in the bottom right of the circuit board.
-
Insert the new battery into the battery socket.
-
Place the foam on the surface of the new battery (reference Step 5).
-
-
-
Under the battery, remove the two screws holding the battery mount in place.
-
Remove the battery mount.
-
-
-
Flip open the black pieces on either end of the white connection strip holding the side buttons onto the circuit board.
-
-
-
Insert the blue stripes of the new white connection strip into both white connection points.
-
One connection point is on the plastic plate that has the buttons. The second connection point is where the battery mount was.
-
To reassemble your device, follow these instructions in reverse order.
2 comments
Where can i buy a new Strip?
Rathura -
Did you find the strip? Im looking or it as well.